Summary Information - Command Line -SFilename.Drv - Set soundcard driver -Sxx Quick set sound card 0 = No Sound 1 = PC Speaker 2 = Sound Blaster 1.xx 3 = Sound Blaster 2.xx 4 = Sound Blaster Pro 5 = Sound Blaster 16 6 = Sound Blaster AWE 32 7 = Gravis UltraSound 8 = Interwave IC 9 = Pro Audio Spectrum 10 = Pro Audio Spectrum 16 11 = Windows Sound System 12 = ESS ES1868 AudioDrive 13 = EWS64 XL Codec 19 = Generic MPU401 driver 20 = Disk writer device -Axxx Set sound card's address (hexadecimal) -D# Set DMA channel (decimal) -I## Set IRQ number (decimal) -M##### Set mixing speed (decimal) -L### Limit number of channels -C Control playback in DOS Shell (with Grey +/-, Right Alt & Right Ctrl) -F Disable file-colour distinctions -K Exchange F1 and F11 keys -Px Pattern memory allocation strategy. -P0 = Try to store patterns in conventional memory first, EMS is only used once conventional memory runs out. Not recommended, but those of you who use IT in Windows 3.xx should try this option if you get EMS errors. (I recommend that you don't use IT under Windows 3.xx at all) -P1 = Use one block of EMS for all patterndata. This is the most memory efficient of all the pattern storage modes - (this is also the default) -P2 = Use EMS blocks for each pattern This is a VERY wasteful but 'safe' memory allocation scheme. -R Reverse channels (flip left-right), same as Alt-R on the info page. -T1 Disable usage time indication -T2 Enable timeslice release -V1 Override VGA detection/Matrox detection. -V2 Force matrox compatibility mode (use with -v1) -X1 Disable internal MMTSR -X2 Disable mouse Summary Information - Effects, alphabetically Volume Column Effects Ax - Volume slide up Bx - Volume slide down Cx - Fine volume slide up Dx - Fine volume slide down Ex - Pitch slide down Fx - Pitch slide up Gx - Portament to Hx - Vibrato with speed x General Effects Axx - Set speed (set number of frames per row) Bxx - Jump to order Cxx - Break to row xx of (next) pattern Dxy - Volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up Exx - Pitch slide down by xx EFx - Fine pitch slide down by x EEx - Extra fine pitch slide down by x Fxx - Pitch slide up by xx FFx - Fine pitch slide down by x FEx - Extra fine pitch slide down by x Gxx - Portamento to note with speed xx Hxy - Vibrato with speed x, depth y Ixy - Tremor with ontime x, offtime y Jxy - Arpeggio with halftones x and y Kxy - Dual command: H00 and Dxy Lxy - Dual command: G00 and Dxy Mxx - Set channel volume to xx (0->40h) Nxy - Channel volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up Oxx - Set sample offset to xx00h Pxy - Panning slide, x=0 right; y=0 left; x=F fine right; y=F fine left Qxy - Retrigger note every y frames with volume modifier x Values for x: 0: (nothing) 4: -8 8: (nothing) C: +8 1: -1 5: -16 9: +1 D: +16 2: -2 6: *2/3 A: +2 E: *3/2 3: -4 7: *1/2 B: +4 F: *2 Rxy - Tremelo with speed x, depth y S3x - Set vibrato waveform S4x - Set tremelo waveform S5x - Set panbrello waveform Waveforms for x in S3x, S4x and S5x: 0 = Sine 2 = Square 1 = Ramp down 3 = Random S6x - Pattern delay for x frames S7x - Instrument functions Values for x in S7x: 0: Past note cut 5: Set NNA to note off 1: Past note off 6: Set NNA to note fade 2: Past note fade 7: Turn off volume envelope 3: Set NNA to note cut 8: Turn on volume envelope 4: Set NNA to continue S8x - Set pan position S91 - Set surround sound SB0 - Set loopback point SBx - Loop x times to loopback point SCx - Note cut after x frames SDx - Note delay for x frames SEx - Pattern delay for x rows SFx - Select parameterised MIDI Macro T0x - Tempo slide down by x T1x - Tempo slide up by x Txx - Set tempo (20h->0FFh) Uxy - Fine vibrato with speed x, depth y Vxx - Set global volume to xx (0->80h) Wxx - Global volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up Xxx - Set panning position (0->0FFh) Yxy - Panbrello with speed x, depth y Zxx - MIDI Macro - check MIDI.TXT Summary Information - Effects, categorically Note: Not all effects are listed here. Speed Control Axx - Set speed T0x - Tempo slide down by x T1x - Tempo slide up by x Txx - Set tempo (20h->0FFh) S6x - Pattern delay for x frames SEx - Pattern delay for x rows Position Control Bxx - Jump to order Cxx - Break to row xx of (next) pattern SB0 - Set pattern loopback point SBx - Loop pattern x times Volume Control Ax - Volume slide up Bx - Volume slide down Cx - Fine volume slide up Dx - Fine volume slide down Dxy - Volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up Ixy - Tremor with ontime x, offtime y Mxx - Set channel volume to xx (0->40h) Nxy - Channel volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up Vxx - Set global volume to xx (0->80h) Wxx - Global volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up Rxy - Tremelo with speed x, depth y S4x - Set tremelo waveform Panning Control Xxx - Set panning position (0->0FFh) S8x - Set pan position S91 - Set surround sound Pxy - Panning slide, x=0 right; y=0 left; x=F fine right; y=F fine left Yxy - Panbrello with speed x, depth y S5x - Set panbrello waveform Pitch Control Exx - Pitch slide down by xx EFx - Fine pitch slide down by x EEx - Extra fine pitch slide down by x Ex - Pitch slide down Fxx - Pitch slide up by xx FFx - Fine pitch slide up by x FEx - Extra fine pitch slide up by x Fx - Pitch slide up Gxx - Portamento to note with speed xx Gx - Portamento to Hxy - Vibrato with speed x, depth y Hx - Vibrato with speed x Uxy - Fine vibrato with speed x, depth y S3x - Set vibrato waveform Jxy - Arpeggio with halftones x and y Summary Information - Pattern Editor 1 Data Entry Alt-0 -> Alt-9 Set skipvalue to 0-9 . (period) Clear field(s) 1 Note cut (^^^) ` Note off (ÍÍÍ) / panning toggle (in volume column) Spacebar Use last (default) note/instrument/volume/effect/effectvalue ³ ³ ³³ ³ ³ ³ ³³ ³³ ³ ³ ³ ³³ ³ ³ ³ ³³ ³³ ³ ³ ³ ³³ ³ ³ ³ ³ ³³ ³ ³ ³ ³³ ³³ ³ ³ ³ ³³ ³ ³ ³ ³³ ³³ ³ ³ ³ ³³ ³ ³ ³ ³S³³D³ ³ ³G³³H³³J³ ³ ³2³³3³ ³ ³5³³6³³7³ ³ ³9³³0³ ³ ³ ÀÂÙÀÂÙ ³ ÀÂÙÀÂÙÀÂÙ ³ ÀÂÙÀÂÙ ³ ÀÂÙÀÂÙÀÂÙ ³ ÀÂÙÀÂÙ ³ ³ Z³ X³ C³ V³ B³ N³ M³ Q³ W³ E³ R³ T³ Y³ U³ I³ O³ P³ ÀÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÙ Pattern selection +, - Next/Previous pattern (*) Shift +, - Next/Previous 4 patterns (*) Ctrl +, - Next/Previous order's pattern (*) Miscellaneous Enter Get default note/instrument/volume/effect '<' or Ctrl-Up Decrease instrument '>' or Ctrl-Down Increase instrument Grey '/' Decrease octave Grey '*' Increase octave ',' (comma) Toggle edit mask for current field Ins/Del Insert/Delete a row to/from current channel Alt-Ins/Del Insert/Delete an entire row from pattern (*) Alt-N Toggle Multichannel 2*Alt-N Multichannel selection menu Alt-Enter Store pattern data Alt-Backspace Revert pattern data (*) Ctrl-Backspace Undo - any function with (*) can be undone. Ctrl-F2 Set (multiple) pattern length Cursor Control Up/Down Move up/down by the skipvalue Ctrl-Home/End Move up/down by 1 row Alt-Up/Down Slide pattern up/down by 1 row Alt-Left/Right Move forwards/backwards one channel Ctrl-Left/Right Move left/right between track columns Tab/Shift-Tab Move forwards/backwards to note column PgUp/PgDn Move up/down by n lines (n=Row hilight major) Ctrl-PgUp/PgDn Move to top/bottom of pattern Home Move to start of column/start of line/start of pattern End Move to end of column/end of line/end of pattern Backspace Move to previous position (accounts for Multichannel) Ctrl-C Toggle centralise cursor option. Track View Functions Alt-T Cycle current track's view Alt-R Remove all track views Alt-H Toggle track-view divisions Ctrl-0 Deselect current track Ctrl-1 - Ctrl-5 View current track in scheme 1-5 Ctrl-Left/Right Move left/right between track columns Left-Ctrl & Left-Shift 1-4 Quick setup view scheme (and enable cursor-tracking) Ctrl-T Toggle view-channel cursor tracking Summary Information - Pattern Editor 2 Block functions. Shift-Movement Mark block Alt-B Mark beginning of block Alt-E Mark end of block Alt-D Quick mark n/2n/4n/... lines (n=Row Hilight Major) Alt-L Mark entire column/pattern Alt-U Unmark block/release clipboard Alt-Q Raise notes by a semitone (*) Alt-A Lower notes by a semitone (*) Alt-S Set instrument (*) Alt-V Set volume/panning (*) Alt-W Wipe volume/panning not associated with a note/instrument (*) Alt-K Slide volume/panning column (*) 2*Alt-K Wipe all volume/panning controls (*) Alt-J Volume amplifier (*) / Fast Volume attenuate (*) Alt-Z Cut block (*) Alt-X Slide effect value (*) 2*Alt-X Wipe all effect & effect value data (*) Alt-C Copy block into clipboard Alt-P Paste data from clipboard (*) Alt-O Overwrite with data from clipboard (*) Alt-M Mix data from clipboard with pattern data (*) Alt-F Double block length (*) Alt-G Halve block length (*) Alt-I Select template mode / Fast volume amplify (*) Ctrl-J Toggle fast volume amplification with Alt-J/Alt-I Playback functions 4 Play note under cursor 8 Play row Ctrl-F6 Play pattern from current row Ctrl-F7 Set/Clear playback mark (for use with F7) Alt-F9 Toggle current channel on/off Alt-F10 Solo current channel on/off